12345
6789
1. DATA DOWN Ø2 (GND)
2. DATA DOWN Ø1 (HOT)
3. +12V
4. 0V
5. DATA UP (HOT)
6. DATA UP (GND)
1. DATA DOWN Ø2 (GND)
grey
2. DATA DOWN Ø1 (HOT)
red
3. +12V
green
4. 0V
yellow
5. DATA UP (HOT)
blue
6. DATA UP (GND) black
6. DATA UP (GND) black
5. DATA UP (HOT)
blue
4. 0V
yellow
3. +12V
green
2. DATA DOWN Ø1 (HOT)
red
1. DATA DOWN Ø2 (GND)
grey
SMARTPAX END
SMARTBRANCH FIRSTCABLE. ART. NO 3443
SMARTBRANCH LINKCABLE. ART. NO 3444
SMARTBRANCH END
(DATA UP)
SMARTBRANCH cable wiring
PROGRAMMING
POWERLINK functions are accessed and
programmed from Dataton TRAX control
software, version 3.6.1 or later, avail-
able free of charge from Dataton’s web-
site: www.dataton.com
To program POWERLINK, create a
Switch device in TRAX and select Dataton
POWERLINK on the Type pop-up menu.
Specify a port and a subaddress corre-
sponding to the output/input number on
the unit. Set the Function to input, output
or both as appropriate.
If you are running multiple POWERLINK
units on the same SMARTPAX QC port,
use subsequent subaddresses for the
additional inputs and outputs, eg, use
subaddress 9 for the first input/output on
the second POWERLINK, and so on. To
program the outputs, use a Trigger cue set
to On, Off, Pulse or Toggle and assigned
to the switch device(s) to be controlled.
For full details, please refer to
the information database
inside Dataton TRAX.
PR SH power2Fkeylink 99-04-09 11.11 Page 3
