INSTALLATION
Plug the snap-lock connector into one of
the ports on the back of a SMARTPAX
QC. Plug the male DIN connector into
the MIDI IN port of the device you want
to control.
CONFIGURATION
In most cases, SMARTPAX is configured
automatically from Dataton TRAX. You
must, however, manually set the SMART-
PAX port address to correspond to the
device’s address in TRAX. If you are
using the manual mode in TRAX, you
will need to configure SMARTPAX using
its port, address and device buttons.
Please refer to the SMARTPAX product
sheet and the TRAX handbook for more
details.
The following MIDI-related drivers are
available:
• MIDI channel drivers, for issuing note-
on/note-off messages to a sampler or
synthesizer for sound effects.
MIDI
SMART-
LINK
MIDI SMARTLINK allows you to
control most devices compatible
with the MIDI standard.
MIDI 3470
Art. No. 3470
pdf cut n paste 990916 99-09-16 18.50 Page 19
