© Copyright 1999 by Dataton AB, Sweden. Specifications are subject to change without prior notice. Document reference no. 3700/13–16
GENERAL
AUDIO SMARTLINK is an eight
input/two output audio mixer (four
stereo pairs) and is used as part of the
Dataton control system. Two additional
fixed inputs allow multiple units to be
cascaded for increased input capacity.
The gain in each of the eight amplifiers
may be set b31.5 dB and
–95.5 dB, making it useful for high-level
output microphones and line-level audio
signals.
The control path is isolated from the
audio circuitry in AUDIO SMARTLINK to
avoid ground loop problems among the
audio gear and the rest of the rig.
PROGRAMMING
For details on how to program AUDIO
SMARTLINK with Dataton TRAX, please
refer to the device information database
available from within TRAX or the TRAX
user’s guide.
IMPORTANT
To avoid excessive clipping and distor-
tion, please ensure that input signals
have no DC components. This is normal-
ly not a problem for audio signals origi-
nated from standard audio sources.
Squeeze
here to
disconnect
Smartlink
cables
connected
to SMARTPAX
Technical Description
• Frequency response: 0-35 KHz
• Dynamic range: 110 dB
• THD+N: < 0.001%
• Max signal level: +10 dBU
• Control range: –95,5 to +31,5 dB
(0,5 dB steps)
• Gain control: To avoid audible
interference, gain control takes
place while signal is zero
crossing.
• Inputs: Unbalanced 10 K
Ω
.
• Output: Unbalanced, 600
Ω
driving capability.
• LEDs on front panel indicate over-
loading on the associated ampli-
fiers.
The AUDIO SMARTLINK cable is
1.6m (63”) long and may be extend-
ed with Dataton EXTENSION CABLE,
article number 3451 (1m), 3452
(2m) or 3455 (5m).
AUDIO SMARTLINK measures
47
×
17
×
125 mm, connectors and
cable excluded.
pdf cut n paste 990916 99-09-16 18.50 Page 16
