Instrument Tour
R&S
®
NGL200/NGM200
19
Getting Started 1178.8720.02 ─ 06
Both instrument models are equipped with 4 terminals. The NGL201, NGM201
models provide both the output plus the sense connectors at the front panel while
the NGL202, NGM202 models provide only output terminals for both channels.
USB connector (6)
The USB connector is a Type-A connector. You can connect a USB flash drive to
this connector to perform a firmware update, store logging data or screen shots.
Power key (7)
The [Power] key switches the instrument on and off.
4.1.2
Rear Panel
shows the rear panel of the R&S
NGL/NGM with its connectors.
Figure 4-2: Rear panel of R&S
NGL/NGM with 2 channels
8 = AC inlet with fuse holder and voltage selector
9 = Channel 1 rear panel connector for NGL202, NGM202 models. The two D.n.c. labels for
NGM201 are labeled as DVM+ and DVM-
10 = Channel 2 rear panel connector for NGL202, NGM202 models. The two D.n.c. labels for
NGM202 are labeled as DVM+ and DVM-
11 = USB connector (device)
12 = USB connector (host)
13 = Ethernet (LAN) connector
14 = Optional IEEE-488 (GPIB) interface
15 = Digital I/O connector
Overview of Controls
