DATATEC 3638.3376.02 Getting Started Download Page 2

Page: 2 / 30

This manual describes the following R&S

NGL/NGM models with firmware ver-

sion 1.00 and higher:

●

R&S

NGL201 Single-channel power supply 60W (3638.3376.02)

●

R&S

NGL202 Two-channel power supply 120W (3638.3376.03)

●

R&S

NGM201 Single-channel power supply 60W (3638.4472.02)

●

R&S

NGM202 Two-channel power supply 120W (3638.4472.03)

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1178.8720.02 | Version 06 | R&S

NGL200/NGM200

Throughout this manual, products from Rohde & Schwarz are indicated without the

symbol, e.g.

R&S

NGL200, R&S

NGM200 are indicated as R&S

NGL/NGM.

Summary of Contents for 3638.3376.02































Search results

Summary of Contents for 3638.3376.02

Reviews:

Related manuals for 3638.3376.02

Brands by name

Popular brands

DATATEC 3638.3376.02, Getting Started

Search results

Summary of Contents for 3638.3376.02

Reviews:

Related manuals for 3638.3376.02

Brands by name

Popular brands