background image

56

Getting Started with DT800 

dataTaker

UM-0071-A0

9-4

A

DD

 M

ORE

 

C

HANNELS

 

TO

 

S

CHEDULE

 A

Now add more DT800 channels to schedule A. 
Because they’re all on schedule A, they’ll all be read 
every 5 seconds.
You’ll add

• channel 6 — to be read as a voltage
• channel 7 — to be read as a voltage
• channels 9 to 12 — to be read as thermocouples.

If you have actual sensors you want to connect them to 
these channels, do it now. If you haven’t, don’t worry 
— you’ll still be able to work through this tutorial and 
see data returned (although the data will be nonsense).

➲ 

Use row 2 (

R2

) to instruct the DT800 to 

read its channel 6 as an unshared differential 

+/–  voltage.

To do this…

a) Single-click in the 

Signal

 column of 

R2

.

b) Click the drop-down list button that appears and 

choose 

Voltage

.

c) In the 

Wiring

 column of 

R2

, click the Configure 

button

.

The Voltage Wiring dialog box opens for row 2 
(Figure 56).

d) In the 

Start Channel

 field at the top of the Voltage 

Wiring dialog box, click the up button

 until the 

field contains 

6

.

Notice that the number in the End Channel field also 
changes to 6.

e) Leave the 

Differ/–

 configuration selected 

(Figure 56) and click 

OK

.

Channel 6’s channel definition (R2) should look like 
Figure 60 on page 58.

Leave the 

Differ/–

 

option selected.

Set the Start Channel 

to 

6

.

F

IGURE 

56

Defining channel 6 for voltage measurement

Summary of Contents for DT800











































































Reviews: