4209-00009-000 EasyRead (DSV3-EP) User’s Manual
Rev 0E
6/29/2009
6
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
2
Unpacking & Inventory
Depending on the number of terminals ordered, your DSV3 units and accessories may be shipped in either
a single-pack box or a multi pack-box. Carefully open the shipping box and use the following inventory
list to verify the contents.
Shipping Box Inventory:
•
DSV3 Mobile Biometric Terminal
•
Universal (90-240 VAC input) DC power/charging adapter.
•
AC power cord for DC power/charging adapter. (Plug depends on country of destination)
•
Documentation: User Manual (on CD), End User License Agreement, and Quick-Start Guide.
+
Please retain the shipping box in the event you need to return your product for service.
3
Initial Setup
•
Each unit is shipped with a Lithium Polymer battery installed as shown below.
•
It is recommended that you fully charge the battery before use to maximize operating time before
recharging is required. The EasyRead contains an integrated charging circuit that allows the
batteries to be charged inside the unit whenever the unit is properly connected to the AC adapter.
•
The unit may be operated when connected via the AC adapter, regardless of the charge state of the
internal battery.
+
Please refer to Section 4.4 “Battery Charging and Replacement”, for additional instructions and
safety information.
EasyRead (DSV3-EP)
EasyVerify (DSV3-SP)
