Maintenance
48
Chapter 9 - Maintenance
9.1 Filter Maintenance
The
system filter is an integral part of the VSNMicro 600 and as such it needs to be maintained correctly. Failure to maintain
the filter can result in the system overheating and causing it to fail. In normal operating conditions the filter should be removed
and cleaned every 3 months. However, this 3 month period is a guide only and it can be increased to every 6 months or
decreased to one month depending on the levels of dust in the environment the system is operating in.
It is recommended that the condition of the filter is checked at regular intervals.
The filter can be removed and cleaned whilst the system is in operation, system shut-down is not necessary.
Note:
Failure to maintain the system filter could result in damage to your system and invalidate the warranty.
9.1.1 Remove the Filter
The system filter is housed within the mesh cover on the front panel. Gently pull the mesh cover away from the front of the
main unit and remove the filter from within.
Shake the filter to remove any dust particles, this should not be done in close proximity to the system to avoid dust ingress.
Ideally, the filter should be cleaned using a vacuum cleaner.
Note: The filter should never be immersed in water or any other cleaning liquid.
For advice on replacement filters, please contact Datapath Ltd.
Remove the filter from the rear of
the mesh cover to clean.
