Datamax H-4212, Operator'S Manual

Page: 86 / 186

76 H-Class
Prompts and Condition Messages (continued)
Displayed Message Description Action / State
CANCEL REPRINT
ENTER KEY = YES
The CANCEL or TEST Key
was pressed during a fault. The reprint will be cancelled
if ENTER is pressed.
CLEARING FAULTS
The printer is attempting to
clear an error condition. The FEED Key was pressed
following a fault.
DMXNET INITIALIZING
The network card is
initializing.
This is normal following
power-up or reset and,
depending upon the
settings, it may take a few
minutes.
ENTER PASSWORD
0 - - -
This is the menu gateway.
The four-digit password
must be entered for menu
access.
INVALID ENTRY
An incorrect entry has been
made.
An invalid setting or
selection was entered.
NOT INSTALLED
The selected option or
feature cannot be found. An uninstalled or undetected
item was requested.
OFFLINE
The printer is in Menu or
Test Mode.
The Menu or Test Button
was pressed.
PAUSED
The printer is in a paused
condition.
The PAUSE Key was pressed
or Pause Mode is enabled.
PRINTHEAD CLEANING
Automatic printhead
cleaning is in progress.
The TEST Button was
pressed and held, or CLEAN
HEAD NOW was selected.
READY
This is the operating mode
indicator.
The printer is waiting to
receive label formats,
downloads, etc.