Datamax H-4212, Operator'S Manual

Page: 58 / 186

48 H-Class
Printer Options (continued)
Menu Item Details
GPIO PORT
Controls the optional Applicator Interface Card’s GPIO
function, where:
GPIO DEVICE Sets the option to work with a specific device type,
where:
—
DISABLED Disables the option.
APPLICATOR
Enables the following GPIO parameters for label
applicator functions:
•
De-asserts Data Ready (DRDY) when the last label
starts printing to indicate completion;
•
FEED allowed at any time; and,
•
Does not de-assert DRDY upon PAUSE.
APPLICATOR 2
Enables the following GPIO parameters for label
applicator functions:
•
Data Ready (DRDY) overlaps End of Print (EOP)
signal by about 1 msec. to indicate completion;
•
DRDY signal end inhibits FEED; and,
•
De-asserts DRDY upon PAUSE or FAULT.
BARCODE VERIFIER
Enables the GPIO Port to work with a bar code verifier.
START OF PRINT
Selects the type of input signal required to initiate
Start of Print (SOP), where:
LOW PULSE
Triggers printing with a low pulse.
HIGH PULSE
Triggers printing with a high pulse.
ACTIVE LOW
Triggers printing with a low signal.
—
ACTIVE HIGH Triggers printing with a high signal.
EDGE
Triggers printing with a signal edge transition.