Datamax ?-class series, Maintenance Manual

Page: 24 / 149

Adjustments and Maintenance
2-14
Advanced Entry Calibration (continued)
Step Action Displayed Message Comment
8 Press the Key.
!
BEWBODFE!FOUSZ!
TFOTPS!HBJO
!
!!
You are beginning the Advanced
Entry Calibration.
9 Press the Key.
Place the label under the
Sensor Eye Mark and
lower the printhead
assembly.
!
HBJO!USBO!!!!!=zzz?!
+11!!!!!!!!=1!.!42?
!
!
-Or-
HBJO!SFGM!!!!!=zzz?!
+11!!!!!!!!)1!.!42*
!
If using preprinted media, ensure
the label area under the sensor is
free of preprinted text, graphics,
borders or perforations.
Note: Do NOT move the position of the Media Sensor after it has been adjusted.
10 Press the Key to
select the setting (denoted
by an ‘
*
’). Record this
sensor reading (the ‘yyy’
value) as a
Label Value in
a table similar to the one
shown below.
Next, press the
Key to increment the Gain
Number.
Repeat this step for each
of the Gain Numbers (00-
32).
!
HBJO!USBO!!!!!=zzz?!
+11!!!!!!!!=1!.!42?
!
!
-OR-
HBJO!SFGM!!!!!=zzz?!
+11!!!!!!!!)1!.!42*
!
Where ‘yyy’ is a numerical value
representing the current sensor
reading: useful in locating the best
sensor position.
Note: Never position the sensor
over a perforation when recording a
sensor reading.
Gain
Number
Label
Value
TOF
Value
Difference
Value
00 255
01
02
…
Sample table:
Use a list similar to
the one shown right,
with enough rows to
record the data for
each of the 33 Gain
Numbers.
32