Datalogic TaskBook, User Manual

Page: 67 / 112

Software Keyboard
User’s Manual 61
L05_Norm = ...|VK_F1;"F1";#KUSE2=<Layout2>;"This is 0x0A two
lines added"|...
Keycodes Definition with #EXT
If you want to assign a key with multiple codes, this is done by
means of
#EXT definition within a key definition. Using #EXT only
the symbolic name of the definition is indicated. The actual
definition of each key code will be executed in the section
[Extended
Keys] :
DefName1=Key1,Key2,Key3,.....
DefName2=Key1,Key2,Key3,.....
In the section a maximum of 20 different strings can be defined with
multiple key codes. The maximum length of the symbolic name
DefName is 50 characters. In a definition (in a row) a maximum of
100 key codes may be defined. As a separator between different
codes a comma is used. To generate a comma, this can be done
through the name VK_COMMA.
To assign a keyboard key with Ctrl-Alt-Delete, the following
definition must be specified:
DefName=#CTRL_ALT_DEL
Before releasing a Key sequence, all other Keys will be "released" to
prevent problems with mixing of keystates like Shift, Control and Alt.
Example:
[ExtendedKeys]
MyTestString
= This is a test!
TextExt1 = @
TestExt2 = VK_ALTGR,q
Special = VK_ESCAPE,VK_F1, This was ESC and F1
[Keyboard_XX]