Advanced Device Configuration
46
TaskBook
The final mode (mode 3) is seldom used. In this mode, the VMC will
power up anytime there is power applied. Both IGN and PWR are
ignored in this state.
When the VMC is being powered down by IGN, it will typically display
a countdown screen advising the user the remaining time before the
terminal shuts down. The shutdown time as well as whether the
countdown is displayed are both controlled by the configuration file.
Configuration (in \Utilities\UtilConfig.cfg):
•
PowerOnMode
sets the Startup/Shutdown mode.
-
0 = IGN or PWR
-
1 = IGN and PWR
-
3 = AutoOn
•
IgnOffDialog
displays the shutdown timer window when IGN is
turned off
-
0 = Do not display the window
-
1 = Display the shutdown timer window
•
IgnOffDlgType
size of the shutdown timer window if enabled
-
0 = Full screen display, no user interaction is allowed (not
recommended)
-
1 = Medium size display, user may move the window and
interact with the system
NOTE
If the VMC is powered up via IGN, but powered down via
PWR, it will immediately begin to power back up.
Summary of Contents for TaskBook
