Buttons Bar
22
TaskBook
Scan Function
This function allows to set the buttons in the buttons bar as soft
triggers to scan barcodes. After pressing the
Scan Function
key:
•
the menu bar disappears
•
the message "Scan function for key bar ON" appears for a few
seconds
•
the icon
appears on the screen.
When this function is activated the scanner can be triggered with the
following buttons:
•
S
•
Menu
•
Key
The above listed buttons will only act as scan triggers while this
function is active (i.e. while the icon is on the screen).
To exit the
Scan Function
, press the
Lock
button on the screen. The
message "Scan with every button OFF" will appear for a few seconds
to confirm that this function has been disabled.
NOTE
You can drag and drop the Lock icon to another position on
the screen if desired.
Summary of Contents for TaskBook
