Datalogic SG4-RB2-050-OO-W, Instruction Manual

Page: 27 / 95

20
•
ESPE has to be correctly aligned, press slightly on the product side in both directions the
red LED must not turn on .
•
The activation of the TEST function causes the opening of the OSSD outputs (red LED
on and controlled machine stop).
•
The response time at machine STOP, including the ESPE and machine response times,
must be included in the limits defined in the calculation of the safety distance (refer to
section 3
– “INSTALLATION MODE”).
•
The safety distance between the dangerous parts and ESPE must comply with the
requirements indicated in section 3
– “INSTALLATION MODE”.
•
A person must not access or remain between ESPE and the dangerous parts of the
machine.
•
Access to the dangerous areas of the machine must not be possible from any unprotected
area.
•
ESPE must not be disturbed by external light sources, ensuring that it remains in NORMAL
OPERATION condition for at least 10-15 minutes and, placing the specific test piece in the
protected area, in the SAFE state for the same period.
•
Verify the correspondence of all the accessory functions, activating them in the different
operating conditions.