1
A model with a QD connector requires a mating cordset.
1
S70 Series
Advanced sensor with dual digital displays
for use with plastic and glass fiber optic assemblies
For complete technical information about this product, including dimensions, accessories, and specifications, see
www.datalogic.com
.
Figure
1
WARNING: Not to be used for personnel protection
Never use this device as a sensing device for personnel protection.
Doing so could lead to serious injury or death.
This device does not include the self-checking redundant
circuitry necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Outputs
Connector
1
S70-2-E1-N
Single NPN
2 m cable, 4-wire
S70-2-E1-P
Single PNP
S70-5-E1-N
Single NPN
Integral M8 Pico QD connector, 4-pin
S70-5-E1-P
Single PNP
S70-5-E1-PZ
Dual outputs, 1 push-pull IO-Link and 1 PNP
(complementary outputs)
S70-5-E2-N
Single NPN
Integral M8 Pico QD connector, 4-pin
S70-5-E2-P
Single PNP
CONNECTIONS
NPN Version
PNP Version
IO-Link
Version
NOTE: Open lead wires must be connected to a terminal block.
1
Output LED
2
LO/DO Switch
3
RUN/PRG/ADJ Mode Switch
4
Lever Action Fiber Clamp
5
Red Signal Level
6
Green Threshold
7
+/SET/- Navigation key
LOAD
LOAD
10-30 VDC
10-30 VDC
Remote
Programming (N.O.)
Remote
Programming (N.O.)
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Pico
4
3
2
1
(C/Q)
Load
18-30 VDC
(Q)
Load
Load
Load
