This product is covered by one or more of the following patents.
European Patent 851,211 B1; 1,111,690 B1; 1,148,346 B1; 1,209,487 B1.
Italian Patent IT 1,321,772.
S5N-
PS/MS…M
Background suppression
INSTRUCTION MANUAL
CONTROLS
OUTPUT LED
The yellow LED ON indicates that the NO output is closed.
READY/ERROR (bicoloured) LED
When permanently green indicates a normal operating conditions and the
sensor is ready to function correctly (stability condition). The alternative
green / red blinking indicates a wrong detection.
Please refer to the “SETTING” paragraph for acquisition or setup
procedure indications.
SET PUSHBUTTON
A long pressure on the pushbutton activates the self-setting procedure.
INSTALLATION
S5N-
PS…M:
The sensor can be fixed by means of the M18x1 threaded
body through a
18mm hole, using the specific washer and the two
CH.24 nuts enclosed (1.5Nm maximum tightening torque).
Alternatively, the sensor can be mounted through the two housing’s holes
using two screws (M3x22 or longer) and washer.
Amongst the various possible solutions, we suggest to choose the
combination that offers the best visibility of the signalling LEDs and the
easiest access to the SET pushbutton.
22mm nuts, h=8mm, (2Nm maximum tightening torque) are available to
guarantee an improved torque.
S5N-
MS…M:
The sensor can be fixed by means of the M18x1 threaded
body through a
18mm hole, using the specific washer and the two
CH.24 nuts enclosed (22Nm maximum tightening torque).
For both plastic version and metallic version are available various
orientable fixing brackets to ease the sensor positioning (please refer to
the accessories listed in the general catalogue).
The operating distance is measured
from the front surface of the sensor
lens.
For the best detection, the object has to
move closer or further away from this
surface. In presence of a lateral
movement, the object has to move as
indicated in the drawing.
CONNECTIONS
The connections are compliant to the EN 60947-5-2 standard.
+
10 … 30 Vdc
NC OUTPUT
BROWN
1
WHITE
2
BLACK
4
BLUE
3
NO OUTPUT
0 V
M12 CONNECTOR
10 … 30 Vdc
-
+
NO OUTPUT
0 V
NC OUTPUT
(WHITE)
(BROWN)
(BLUE)
(BLACK)
2
3
1
4
DIMENSIONS
S50-PS VERSION
CABLE VERSION
S50-MS VERSION
24
SET PUSHBUTTON
OUTPUT LED
STABILITY LED
STABILITY LED
OUTPUT LED
Ø4
CABLE VERSION
10
OUTPUT LED
STABILITY LED
Ø4
10
mm
46
25
M12
42
24.5
M18
16.8
14
6
10
22
79
14.5
24
14
6
10
22
79
14.5
16.8
24.5
33
M18
M12
OUTPUT LED
STABILITY LED
SET PUSHBUTTON
TECHNICAL DATA
S5N-PS PLASTIC VERSIONS
S5N-MS METAL VERSIONS
Power supply:
10 … 30 Vdc limit values
Ripple:
2 Vpp max.
Current consumption
(output current excluded):
30 mA max.
Outputs:
NO and NC; PNP or NPN
(short-circuit protection)
Output current:
100 mA max.
Output saturation voltage:
2 V max.
Response time:
1 ms
Switching frequency:
500 Hz
Indicators:
OUT PUT LED (YELLOW) / READY/ERROR LED (GREEN/RED)
Setting:
SET pushbutton
Operating mode:
LIGHT mode on NO output / DARK mode on NC output
Data retention:
EEPROM non volatile memory
Operating temperature:
-
25 … 55 °C
Storage temperature:
-
25 … 70 °C
Insulating strength:
500 Vac 1 min., between electronics and housing
Insulating resistance:
>20 M
500 Vdc, between electronics and housing
Operating distance (typical values):
15…100 mm proximity; 50…100 mm background suppression
Emission type:
red (670 nm)
Ambient light rejection:
According to EN 60947-5-2
Vibrations:
0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)
Shock resistance:
11 ms (30 G) 6 shock for every axis (EN60068-2-27)
Housing material:
PBT
Nickel-plated brass
Lens material:
PMMA
Mechanical protection:
IP67 Metal versions type 1 enclosure
Connections:
2 m cable
4 mm / M12 - 4 pole connector
Weight:
90g. max. cable vers. /40g. max. conn. vers.
125g. max. cable vers. /75g. max. conn. vers..
SETTING
EASY TOUCH
The sensor uses the patent-covered EASY TOUCH
technology that
allows a rapid and safe self-setting of the product.
Two different setting possibilities are available:
- EASY TOUCH
;
press for 2 sec. of the SET pushbutton allows self-
setting.
-
FINE DETECTION;
to be used only in particularly critical conditions;
this setting procedure is used only when the EASY TOUCH
is not
sufficient.
Setting of S5N-
PS/MS…M
To set correctly the sensor, the background or object to be suppressed
has to be present during self-setting.
-
EASY TOUCH
(standard detection)
Place the background or the object to be suppressed inside the
operating range.
Press the SET pushbutton until the READY/ERROR LED turns OFF.
Release the SET pushbutton and wait for the READY/ERROR LED to
turn green.
The sensor is now ready to detect all objects in the set range
distinguishing them from the suppressed background (output LED
turns ON).
-
Fine detection
Place the background or the object to be suppressed inside the
operating range.
Press the SET pushbutton and keep it pressed until the
READY/ERROR LED turns OFF and then begins to blinks green.
The sensor in this case makes a fine setting and is ready to detect with
better precision objects different from the background (output LED
turns ON) .
Datalogic S.r.l.
Via S. Vitalino 13 - 40012 Calderara di Reno - Italy
Tel: +39 051 3147011 - Fax: +39 051 3147205 - www.datalogic.com
Helpful links at www.datalogic.com:
Contact Us,
Terms and
Conditions,
Support
.
The warranty period for this product is 36 months. See General Terms
and Conditions of Sales for further details.
For information about the disposal of Waste Electrical
and Electronic Equipment (WEEE), please refer to the
website at
© 2007 - 2019 Datalogic S.p.A. and/or its affiliates
ALL RIGHTS
RESERVED.
Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a
retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A.
and/or its affiliates. Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U. All other trademarks and brands are property of their
respective owners. Datalogic reserves the right to make modifications
and improvements without prior notification.
821006261 Rev.B
S5N-PS VERSION
S5N-MS VERSION
