This product is covered by one or more of the following patents.
European Patent 851,211 B1; 1,111,690 B1; 1,148,346 B1; 1,209,487 B1.
Italian Patent IT 1,321,772.
S5N-
PA/MA…M
Background suppression proximity
INSTRUCTION MANUAL
Inf ormation on IO-Link communication is av ailable on the
last page of this manual.
CONTROLS
OUTPUT LED
The yellow LED ON indicates that the N.O. (normally open) output status
is closed.
READY LED
The green LED indicates a normal operating function.
If the green LED flashes, the acquisition has failed.
Please refer to the “SETTING” paragraph for setup procedure
indications.
SET PUSHBUTTON
A long pressure on the pushbutton activates the self-setting procedure.
INSTALLATION
S5N-
PA…M:
The sensor can be fixed by means of the M18x1 threaded
body through a
18 mm hole, using the specific washer two CH.24 nuts
enclosed (1.5 Nm maximum tightening torque).
Alternatively, the sensor can be mounted through the two housing’s holes
using two screws (M3x22 or longer) and washer.
Amongst the various possible solutions, we suggest to choose the
combination that offers the best visibility of the signalling LEDs and the
easiest access to the SET pushbutton.
22 mm nuts, h=8 mm, (2 Nm maximum tightening torque) are available to
guarantee an improved torque.
S5N-
MA…M:
The sensor can be fixed by means of the M18x1 threaded
body through a
18 mm hole, using the two CH.24 nuts enclosed (22
Nm maximum tightening torque).
For both plastic version and metallic
version are available various orientable
fixing brackets to ease the sensor
positioning
(please
refer
to
the
accessories
listed in the general
catalogue).
The operating distance is measured from
the front surface of the sensor lens.
To improve the detection, the object has
to be moved closer or further away from
the front surface of the sensor lens.
In case of lateral translation, the object
must move as indicated in the figure.
CONNECTIONS
The connections are compliant to the EN 60947-5-2 standard.
M12 CONNECTOR
10 … 30 Vdc
-
+
N.O. OUTPUT/
IO-Link
0 V
N.C. OUTPUT
2
3
1
4
DIMENSIONS
CABLE VERSION
67
43
SET PUSHBUTTON
15
34
10
Ø4
24
=
N°.2 Ø3.8
4
=
2.5
=
4
=
3.8
2
READY/ERROR LED
mm
10
Ø4
OUTPUT LED
OUTPUT LED
READY/ERROR LED
81.5
43
CABLE VERSION
=
2.5
4
4
SET PUSHBUTTON
=
24
14.5
25
M18x
1
14
1.5
49
M18x
1
10
S50-PA VERSIONS
S50-MA VERSIONS
14.5
READY/ERROR LED
OUTPUT LED
READY/ERROR LED
OUTPUT LED
10
M12
3.5
M12
TECHNICAL DATA
S5N-PA PLASTIC VERSIONS
S5N-MA METALLIC VERSIONS
Power supply:
10 … 30 Vdc (limit values)
Ripple:
2 Vpp max.
Current consumption
(output current excluded):
30 mA max.
Outputs:
N.A. and N.C.; PNP or NPN
(short-circuit protection)
Output current:
100 mA max.
Output saturation voltage:
2 V max.
Response time:
1 ms
Switching frequency:
500 Hz
Indicators:
OUTPUT LED (YELLOW) / READY LED (GREEN)
Setting:
SET pushbutton
Operating mode:
LIGHT mode on N.O. output / DARK mode on N.C. output
Data retention:
non volatile EEPROM memory
Operating temperature:
-
25 … 55 °C
Storage temperature:
-
25 … 70 °C
Insulating strength:
500 Vac 1 min., between electronics and housing
Insulating resistance:
>20 M
500 Vdc, between electronics and housing
Operating distance (typical values):
back
ground suppression 50…150 mm
Emission type:
RED (630 nm)
Ambient light rejection:
according to EN 60947-5-2
Vibrations:
0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)
Shock resistance:
11 ms (30 G) 6 shock for every axis (EN60068-2-27)
Housing material:
PBT
Nickel plated brass
Lens material:
PMMA
Mechanical protection:
IP67 Metal versions type 1 enclosure
Connections:
M12 - 4 pole connector
Weight:
25 g. max. connector vers.
60 g. max. connector vers.
AtEx 2014/34/EU
I I 3G EX nA II T6 ;
I I 3D EX tD A22 IP67 T85°C
Emission:
Exempt Risk Group (RG0) according to IEC 62471
SETTING
EASY TOUCH
The sensor uses the patent-covered EASY TOUCH
technology that allows a rapid and safe self-setting of the product.
Two different setting possibilities are available:
-
EASY TOUCH
;
a long pressure of the SET pushbutton allows self-setting.
-
FINE DETECTION;
to be used only in particularly critical conditions; this setting procedure is used only when the EASY TOUCH
is not
sufficient.
Setting of S5N-
PA/MA…M
To achieve a correct sensor setting, the background or the object to be
suppressied has to be present during self-setting.
-
EASY TOUCH
(standard detection)
Place the background or the object to be suppressed inside the operating
range.
Press the SET pushbutton until the READY LED turns OFF (1s).
Release the SET pushbutton and wait for the READY LED to turn ON.
The sensor is now ready to detect all objects in the set range
distinguishing them from the suppressed background.
-
Fine detection
Place the background or the object to be suppressed inside the operating
range.
Press the SET pushbutton. The READY LED turns OFF.
Keep the SET pushbutton pressed until the READY LED turns on (3s).
The sensor performs a fine adjustment and is ready to detect objects also
very near the suppressed background.
If the green LED flashes, the acquisition has failed.
Datalogic S.r.l.
Via S. Vitalino 13 - 40012 Calderara di Reno - Italy
Tel: +39 051 3147011 - Fax: +39 051 3147205 - www.datalogic.com
Helpful links at www.datalogic.com:
Contact Us,
Terms and
Conditions,
Support
.
The warranty period for this product is 36 months. See General Terms and
Conditions of Sales for further details.
For information about the disposal of Waste Electrical
and Electronic Equipment (WEEE), please refer to the
website at
© 2018 - 2019 Datalogic S.p.A. and/or its affiliates
ALL RIGHTS
RESERVED.
Without limiting the rights under copyright, no part of this
documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose,
without the express written permission of Datalogic S.p.A. and/or its
affiliates. Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All
other trademarks and brands are property of their respective owners.
Datalogic reserves the right to make modifications and improvements
without prior notification.
821006271 Rev.B
S5N-PA VERSION
S5N-MA VERSION
READY L ED
READY L ED
READY L ED
READY L ED
