INSTALLATION
11
2
5 Rotate the whole device until the best viewing position is reached, then insert the
clamping tooth into one of the small holes located beside the larger threaded holes on
Rhino™'s sides.
6
First insert a notched washer into each knob, then insert an even washer
Figure 13 - Mounting of screws and knob
7
Tighten Rhino™ to its bracket by inserting and screwing the knobs into their holes - one
on each side
8
Insert power supply cable into the Rhino™ socket, stopping and rotating clockwise the
metal part
9
Connect the power supply cable to forklift.
Figure 14 - Vehicle Installation
Rhino™ is now ready.
