OPERATION
21
3
3 OPERATION
3.1 POWERING
ON/OFF
Connect the RHINO™ to a power source, either AC ADAPTER or Vehicle.
The power (on/off) switch is a toggle switch located on the bottom of the RHINO™. The Pwr
LED or the display, located on the front of the RHINO™, is lit when the power is off and
switch is off.
CAUTION
Always turn the computer off prior to connecting or disconnecting any
power source.
Figure 25 - The RHINO™ Power Switch
Powering off the RHINO™ before a write (to disk) function has completed, may result
in the corruption of the flash drive.
When the system is turned off, the current contents of RAM are lost. Save any needed data
and exit in an orderly fashion from any running programs before turning the system off.
Switch on the terminal: you are now ready to use Rhino™.
Enter data using the keyboard or a Serial Barcode Scanner.
3.1.1 Reset Key Sequence (Reboot)
To reboot the RHINO™ without turning the computer off, press
:
<CTRL> + <ALT> + <FUNC> + <BKSP>
CAUTION
Rebooting the RHINO™, before a write (to disk) function has completed,
may result in the corruption of data on the hard drive.
When the system is rebooted, the current contents of RAM are lost. Save any needed data
and exit in an orderly fashion from any running programs before rebooting.
