Datalogic PD9330, Product Reference Manual

Page: 93 / 332

Enter/Exit Programming Mode
Product Reference Guide 83
UPC-E Number System Character Transmission
This feature enables/disables transmission of the UPC-E system number
character.
$CEBNS00(CR)
UPC-E Number System Character = Do not transmit
$CEBNS01(CR)
UPC-E Number System Character = Transmit
DEFAULT
UPC-E Minimum Read
This setting has no effect for AR models.
This feature specifies the minimum number of consecutive times a UPC-E
label must be decoded before it is accepted as good read.
UPC-E Minimum Reads = 1
UPC-E Minimum Reads = 2
DEFAULT
UPC-E Minimum Reads = 3
UPC-E Minimum Reads = 4