Datalogic PD9330, Product Reference Manual

Page: 229 / 332

$CBTMS05(CR)
Enter/Exit Programming Mode
Product Reference Guide 219
Bluetooth Friendly Name
You can set a meaningful name for PowerScan BT9300 that will appear in
the application during device discovery.
To set a new Bluetooth Friendly Name, scan the barcode below and follow
the instructions.
Bluetooth Max Client = 5
$CBTMS06(CR)
Bluetooth Max Client = 6
DEFAULT
$CBTMS07(CR)
Bluetooth Max Client = 7
Set Bluetooth Friendly Name
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by a maximum 64 digits from the
Alphanumeric characters in
Appendix D, Keypad
.
The digits must be the hexadecimal ASCII representa-
tion of the desired characters. If less than the expected
string of 32 characters are selected, scan the ENTER/
EXIT bar code to terminate the string.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
$CBTFN
~
DEFAULT
POWERSCAN BT9300
[SERIAL_NUMBER_SCANNER]