Datalogic PD9330, Product Reference Manual

Page: 214 / 332

Enter/Exit Programming Mode
204 PowerScan™ PD9330/PBT9300/PM9300
BATCH FEATURES
Batch Mode
This option specifies whether to store labels in the handheld while discon-
nected from the base. Options are as follows:
• Disabled — The handheld will not store/batch labels.
• Automatic — The handheld will store labels when the handheld goes
out of range and is disconnected from the remote device.
• Manual — The handheld will always store labels. The user must manu-
ally send the stored labels to the remote device using a special "batch
send" label.
DEFAULT
$CBTBM00(CR)
Batch Mode = Disabled
$CBTBM01(CR)
Batch Mode = Automatic
$CBTBM02(CR)
Batch Mode = Manual
Send Batch
When the scanner is configured in Manual Batch Mode, use the following bar
code to initiate sending of labels stored in batch memory.
BatchSend
Send Batch
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.