Datalogic Memor 1, Installation Manual

Page: 28 / 56

Dispenser Construction Details
24 Memor™ 1 3-Slot Cradle
Pistol Grip Models
To mount the cradle on the cabinet, follow the steps below:
1. Mount the cradle wall bracket
1
on the cabinet. Use at least 12
screws to fasten each bracket. The red-circled spacer in the
figure below is used to set the horizontal pitch in case the panel
is not pre-drilled. Remove it from the last bracket of the row by
cutting along the engraving line.
3-Slot Cradle Wall Bracket - P/N 91ACC0050
1. To be ordered separately (Memor 1 / Joya Touch 3-Slot Cradle
Wall Bracket - P/N 91ACC0050).