Datalogic Magellan 9500 Omega, Product Reference Manual

Page: 22 / 460

1-10
Magellan
®
9500
Electrical Specifications
Before installation, always verify that the site’s electrical service meets the
scanner/scale’s requirements. The scanner has been engineered for com-
patibility with most international electrical systems operating in ranges
from 100 to 240VAC at 50-60 Hz. Verify that the power source will sup-
ply “clean” electrical power to the equipment; that is, it must be free of
excess electrical noise.
Check the IEC power cord shipped with the scanner/scale. If the cord will
not plug into your AC power receptacle, the power cord shipped is not
compatible with your electrical system. Please contact your distributor
immediately to receive the necessary information and components to
ensure electrical compatibility.
Power Supply
The scanner utilizes a single power supply for all models. Unique installa-
tion and international connections are accomplished through selection of
the proper IEC power cord
VOLTAGE FREQUENCY PART NUMBER
100-240VAC ±10%
50-60
Hz 8-0582
CAUTION
Safe operation of your scanner or scanner/scale requires properly grounded
electrical outlets. Be sure to have a qualified electrician certify the earth-
ground connection on circuits which will be used to power the unit.
NOTE
The scanner is powered on/off by connecting/disconnecting its AC power
supply.