Datalogic DSM0400, Product Reference Manual

Page: 55 / 252

Enter/Exit Programming Mode
Product Reference Guide 47
Keyboard Numeric Keypad
This feature specifies if numeric characters will be sent using the standard keys
or the numeric keypad.
DEFAULT
Keyboard Numeric Keypad = Standard Keys
Keyboard Numeric Keypad = Numeric Keypad
Keyboard Send Control Characters
This feature is used by USB Keyboard only interface. It specifies how the scan-
ner transmits ASCII control characters to the host.
Options are as follows:
Send Ctrl+Key .
ASCII characters from 00H to 0x1FH inclusive are transmitted in
the format Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key .
The behavior is the same as above, but control keys are
sent in the format Ctrl+Shift+Keys.
Send Special Function Key .
Send characters between 00H and 1FH according to
the special function key mapping table. This is used to send keys that are not in
the normal ASCII set. A unique set is provided for each available scancode set.
DEFAULT
Keyboard Send Control Characters = Send Ctrl+Key
Keyboard Send Control Characters = Send Ctrl+Shift+Key
Keyboard Send Control Characters = Send Special Function Key