Datalogic DSM0400, Product Reference Manual

Page: 141 / 252

Enter/Exit Programming Mode
Product Reference Guide 133
Codabar Set Length 1
This feature specifies one of the barcode lengths for Codabar. Length 1 is the
minimum label length if in Variable Length on page 93 Mode, or the first fixed
length if in Fixed Length on page 93 Mode. Length includes the barcode’s start,
stop, check and data characters. The length must include at least one data
character. The length can be set from 3 to 50 characters. For more detailed
programming instructions see, "Set Length" on Chapter 4, References .
Table 13 provides some examples for setting Length 1.
Table 13. Codabar Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (and pad
with leading zeroes)
03 Characters 09 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODABAR LENGTH 1 SETTING
4
Scan Two Characters From
Appendix C
‘0’ and ‘3’ ‘0’ and ‘9’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character