CONFIGURATION
3
3 CONFIGURATION
Once the card is setup, you can change the default parameters to meet your
application needs by sending the desired strings to the card via COM Port.
The following table lists all configuration commands which do not require the $-
character:
Description
String
Enter Configuration
$+
Exit and Save Configuration
$-
Restore Default
$+$*CR
Transmit Software Release
$+$!CR
Transmit Configuration
$+$&CR
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function based on its reference group.
The configuration parameter groups are the following:
COM
parameters allow the configuration of the COM port.
DATA FORMAT
parameters regard the messages sent and received via COM port.
RADIO PARAMETERS
allow configuration of radio protocol parameters.
NOTE
It is strongly recommended to read par. 4.1 in Radio and Serial
Communication controls and the example applications in appendix A
for correct parameter settings.
5
Summary of Contents for DL Cordless Card DLCC
Page 14: ...xiv...
