QUICK START
The following can be used as a checklist to verify all of the steps necessary for
complete installation of the DL Cordless Card™ for a DOS terminal and for a laptop
(with two PCMCIA overlaid slots for PC cards of type II and with Windows 98, ME,
XP, and later versions).
Installing to portable PC
1) Read all information in the section "Safety Precautions" at the beginning of
this manual.
2) Start your PC.
3) Insert the DLCC correctly in the PCMCIA slot. Refer to the PC user's
manual.
Figure 1 - Laptop Card Installation
A) Windows notifies the PC has a new hardware device (DLCC);
B) Windows searches for a driver;
C) Insert the enclosed installation CD-ROM and follow the procedure;
D) At the end of the driver installation, Windows assigns DLCC a virtual
COM port.
4) Configure the DLCC address according to your application. See
"Configuration Methods".
NOTE
The default communication parameters of the COM port are: 9600
baud, no parity, 8 data bits, 1 stop bit, handshaking disabled
The installation is now complete.
ix
Summary of Contents for DL Cordless Card DLCC
Page 14: ...xiv...
