manualshive.com logo in svg

Datalogic DL-Axist, User Manual, Page: 23 / 265

Share
Download
Datalogic DL-Axist User Manual Download Page 23

Battery

User’s Manual

15

WARNING

Risk of explosion if battery is replaced by an incorrect
type.

Dispose of used batteries according to the instructions.

l y a risque d’explosion si la batterie est remplacée par
une batterie de type incorrect.

Mettre au rebut les batteris usagées conformément
aux instructions.

NOTE

Even if the storage temperature range is wider, in order to
achieve the longest battery life, store the terminal and the
spare batteries between 20 to 30°C (68 to 86°F).

Charging is allowed in the battery temperature range from
0°C to 45°C.

NOTE

To maximize battery life, turn off radios when they are not
needed.

NOTE

To maximize operating autonomy, the DL-Axist checks its
battery level at all times. If the battery is not sufficiently
charged,  the  DL-Axist  will  not  turn  on  when  the  ON/OFF
Power button is pressed.

In this case, either substitute with a charged battery,
insert the DL-Axist into a powered dock, or plug it into a
wall charger.

Summary of Contents for DL-Axist










































































































































































































































































Reviews:

No comments