manualshive.com logo in svg

Datalogic DL-Axist, User Manual, Page: 117 / 265

Share
Download
Datalogic DL-Axist User Manual Download Page 117

Datalogic Applications

User’s Manual

109

l.

VNC Password

This field allows VNC communication to be authenticated, so prying
eyes cannot remotely connect to and control your device. This field
is blank by default.

Advanced Settings

These settings must match settings on DXU in order for the DXU
desktop application to communicate with the your device. A
mismatch will result in a communication failure, which will block all
configuration functionality.

Change these settings only if you understand precisely any
advantage you may gain by doing so. Most users will not realize any
advantage from changing these port settings.

Find these settings in the DXU Agent application on the DL-Axist.

To configure DXU Agent’s 

Advanced Settings

, do this:

1. Launch the DXU Agent application.

2. Tap the Recent Apps button to display the menu.

3. Tap the “Advanced Settings” button.

As with the DXU Agent settings listed above, these advanced
settings can only be changed when the “Enable Service” check box is
cleared.

Summary of Contents for DL-Axist










































































































































































































































































Reviews:

No comments