manualshive.com logo in svg

Datalogic DL-Axist, User Manual, Page: 221 / 265

Share
Download
Datalogic DL-Axist User Manual Download Page 221

User’s Manual

213

Safety and Regulatory Information

General Safety Rules

•

Before using the device and the battery pack, read carefully
the chapter 

Battery on page 9

.

•

Use only the components and accessories supplied by the
manufacturer for the specific DL-Axist being used.

Do not attempt to disassemble the DL-Axist PDA, as it does not
contain parts that can be repaired by the user. Any tampering will
invalidate the warranty.

•

When replacing the battery pack or at the end of the operative
life of the DL-Axist PDA, disposal must be performed in
compliance with the laws in force in your jurisdiction. 

•

Do not submerge the DL-Axist in liquid products.

•

For further information or support, refer to this manual and to
the Datalogic web site: 

www.datalogic.com

. 

NOTE

Read this manual carefully before performing any type of
connection to the DL-Axist PDA.

The user is responsible for any damage caused by
incorrect use of the equipment or by inobservance of the
indication supplied in this manual.

Summary of Contents for DL-Axist










































































































































































































































































Reviews:

No comments