manualshive.com logo in svg

Datalogic DL-Axist, User Manual, Page: 195 / 265

Share
Download
Datalogic DL-Axist User Manual Download Page 195

Connections

User’s Manual

187

MIMO (Multiple-Input and Multiple-Output) 

DL-Axist supports MIMO technology.

MIMO (multiple-input and multiple-output) is a method for
multiplying the capacity of a radio link using multiple transmit and
receive antennas to exploit multipath propagation. It is a practical
technique for sending and receiving more than one data signal with
the same radio channel simultaneously via multipath propagation.

MIMO has become an essential element of wireless communication
standards including IEEE 802.11n (Wi-Fi), IEEE 802.11ac (Wi-Fi),
HSPA+ (3G), WiMAX (4G), and Long Term Evolution (4G). 

NOTE

MIMO technology is only available in Wi-Fi models.

NOTE

Ensure your Wi-Fi infrastructure is compatible with
MIMO technology to provide the best coverage and speed
performance.

Summary of Contents for DL-Axist










































































































































































































































































Reviews:

No comments