Datalogic DL-Axist, User Manual, Page: 130 / 265

Datalogic Applications
122 DL-Axist™
Tasks
Connect to a Device via USB
You can connect to the DL-Axist directly by connecting it to your PC
with a USB cable. DXU will connect to it directly without any further
set-up.
1. Launch DXU .
2. Connect your device to your PC with a USB cable.
3. Click the device’s button in the “Available Device” list.
Connect to a Device via Network Manually
If DXU Agent on the device has its “Enable Discovery Manager”
feature enabled and DXU has “Automatic Discovery of Devices”
enabled under Advanced Settings , then clicking Refresh should
display it in the “Available Device” list if it is in the same subnet.
However, if you want to manually add a device in DXU make sure
both device and system are in the same subnet and do this:
1. On DXU’s main view, click the “Add Device“ button;
2. In the “Add Device“dialog, enter the IP address of the device and
optionally its port if it is has been changed from the default;