manualshive.com logo in svg

Datalogic DL-Axist, User Manual, Page: 200 / 265

Share
Download
Datalogic DL-Axist User Manual Download Page 200

Connections

192

DL-Axist™

Near Field Communication (NFC)

NFC technology allows short-range, wireless data transfer between
the terminal and NFC tags or other NFC enabled devices placed in
close proximity to the back of the terminal.

DL-Axist support the following modes of operation:

•

NFC tag reader/writer mode: the terminal reads and/or writes
digital information from or to an NFC tag.

•

Peer-to-Peer (P2P) mode: the terminal uses Android Beam
and/or Bluetooth@ technology to transfer screen content
(e.g., a picture, web page url, or file) between NFC enabled
devices.

•

NFC  card  emulation  mode  -  The terminal emulates an NFC
card (smart card) that an external card reader can access. 

Read NFC Tags

1. Make sure NFC is enabled (see 

 “Enable NFC” on page -77

).

2. Hold the NFC tag close to the back of the terminal. 

3. When an NFC tag is recognized, the terminal emits a sound and

the tag data displays on the terminal screen.

See also 

 “Tap2Deploy (NFC)” on page -32

 and 

 “Tap2Deploy” on

page -158

.

NOTE

Suspend mode and the screen lock temporarily turns the
NFC radio off.

Summary of Contents for DL-Axist










































































































































































































































































Reviews:

No comments