DataVS1
Series
Instruction
Manual
62
We now go to Adjust mode by pressing the
STATUS
button. Let's increase the expected value
slightly using the
ARROW UP
button as we want exact replicas of the original logo.
Now press the
STATUS
button to enter Monitor Mode and check that the tool functions properly.
The sensor now behaves correctly. As the result is satisfying, press
STATUS
again and move on
to defining the behaviour of the outputs.
Let's associate output 1 to the Part OK behaviour and
output 2 to the Part Fail behaviour. Press
TEACH
to save the modifications.
Now let's save the bank on the sensor. Enter the Bankset menu and save the inspection in
memory bank 1.
