Datalogic AV7000, Product Reference Manual

Page: 259 / 352

SETTING UP THE DK501 (S80) DISTANCE KIT
PRODUCT REFERENCE GUIDE
245
3. Select the Position Sensor Type from the drop-down. Select S80 or S80 with DL
Light Curtain.
4. Enter the Position Sensor Transmit Delay as 127mm. This is required because the
tach controller camera (with or without an S80 connected) tracks the connected
S80’s and DL light curtain to a point that is 127mm past the S80/LC that’s located
the furthest downstream from the PE (and closet to the first camera scanline).
5. Select None or 1 from the Number of S80’s drop-down.
6. For each S80 used, select the correct camera from the Connected to drop-down .
7. If the S80 is required to share its focus information with other cameras on the
same side of the conveyor, select Enable from the Multicast S80 Focus Data drop-
down.
8. Once Multicast is enabled, Camera’s Receiving Multicast Focus Data from an S80
options appear.
9. Select from the Multicast Focus Data drop-downs which cameras will use data
from which S80.
10. Measure the distance from the trigger source to the first S80.
11. Enter this value into the Trigger Source to S80 field. In this example 170 has been
entered.
12. Click Update to save your changes.
13. In e-Genius under Diagnostics, navigate to Serial Comm Status . The Serial Com-
munications Status window opens.