Datalogic AV7000, Product Reference Manual

Page: 209 / 352

PRODUCT REFERENCE GUIDE
195
Hold Last Focus, Gain, Zoom Point
Enter the distance to hold the latest focus, gain, and zoom.
Gain
Gain Mode
Select Profile or Fixed from the drop-down list.
•
Profile Gain
: This changes the gain of the image depending on the distance from the
AV7000 or the speed of the conveyor. This allows the AV7000 to dynamically change the gain
depending on the distance of the package from the AV7000 or the speed of the conveyor
•
Fixed Gain:
This gain will remain constant regardless of distance or speed.
Gain Settings
Tracking Offset
When Profile mode is selected, enter the tracking offset in the field provided.


The Height sensor can be positioned either above or below the 0 focus height as shown in the
figures. However it should not be positioned above the level of the tray/box. In this case the
tray/box would never be detected so the Tracking Offset must be set to compensate. This
Offset then is added to the Percentage of Tray Depth to Set AF therefore degrading the focus
precision.
Fixed Exposure Value
If Fixed is selected, this sets a fixed exposure time to optimize the quality of the acquired image
Fixed Gain Value
This option is only used for testing. It should be set to Normal for regular operation.
Horizontal (Scanline) Digital Zoom
Horizontal Digital Zoom Enable
Select the check box to enable. This allows the AV7000 to maintain a DPI value throughout the
Depth of Field.
Vertical (Direction of Travel) Digital Zoom
Vertical Digital Zoom Enable
Select the check box to enable Vertical Digital Zoom. This allows the AV7000 to maintain a
vertical DPI value throughout the Depth of Field.
Vertical Digital Zoom, Settings
Minimum Vertical Zoom LPI
Enter the minimum vertical digital zoom.
Maximum Vertical Zoom LPI
Enter the maximum vertical digital zoom.
Data Masking
Data Masking Enable
Select the check box to enable the Data Masking options. This enables options for Line Length,
Line Start, and Line End that allows you to isolate a portion of scanning area.
Data Masking Settings
Line Start
Enter a value in pixels in the field provided.
Line End
Enter a value in pixels in the field provided.
3. When you have finished making changes, click
Update
to save or click
Reset
to
revert to the previously saved values.