Datalogic AV7000, Product Reference Manual

Page: 186 / 352

E-GENIUS
172
AV7000 LINEAR CAMERA
Advanced Formatter Message Building Examples
As an example, here are two messages that could be created:
Message #1
will be an Ethernet message on port number 4004.
<STX>(2 character sequence #)xx-(code128 barcode)-(code39 barcode)-(parcel length
mm)xxxx<CR><LF>
Example message: 01-123456789000-450
Message #2 will be a serial message.
<STX>(string of six Xs [xxxxxx] followed by last 4 digits of the barcode),hh:mm:ss<ETX>
Example message: xxxxxx8900,12:59:59
Start by setting up serial and Ethernet connections for three messages:
1. Navigate to Modify Settings | Global Settings | Communications | Transports . The
Transports
window opens.
2. Select the
Serial
option button #1.
3. Select the Enable check box.
4. Select
Advanced
from the
Data Output Protocol
drop-down list.
5. Select an index number from the Advanced Formatter Index . In this example 2 is
selected.
6. Select the Socket option button #2 at the top of the Transports window.
In this example the Barcode Settings Table is set up to read code 1 as a code128 4-40
characters barcode, code 2 is set up as a code39 10 character barcode, and the Code
Combination selection is set for Logical Combination. The Logical Combination rule
equals 1&2. Local No Read(s) Message is selected for the No Read Message.