Datalink Systems i50, Manual

Page: 63 / 75

i50 Manual (5.51) Page 63
© 2018 Datalink Systems, Inc. www.datalinksystemsinc.com
15.3.1 Channel Selection Output
In this mode, the output pins are set based on the current RF zone (using Channel value). When the
i50 is outside all zones, or Zone value exceeds 15, all pins will be inactive.
RF Zone (Channel) Channel Select 4 Channel Select 3 Channel Select 2 Channel Select 1
1 Inactive Inactive Inactive Active
2 Inactive Inactive Active Inactive
3 Inactive Inactive Active Active
4 Inactive Active Inactive Inactive
5 Inactive Active Inactive Active
6 Inactive Active Active Inactive
7 Inactive Active Active Active
8 Active Inactive Inactive Inactive
9 Active Inactive Inactive Active
10 Active Inactive Active Inactive
11 Active Inactive Active Active
12 Active Active Inactive Inactive
13 Active Active Inactive Active
14 Active Active Active Inactive
15 Active Active Active Active