J38D01 - 2 -
SAFETY NOTICE
Failure to follow below instructions will
result in death or serious injury
•
Electrical equipment should be installed only by qualified
specialist. No responsibility is assured by the
manufacturer or any of its subsidiaries for any
consequences resulting from the non-compliance to
these instructions.
•
Check the unit for cracks and damages due to
transportation. Do not install damaged equipment.
•
Do not open the unit. There is no serviceable parts inside.
•
Fuses must be connected to the power supply and phase
voltage inputs, in close proximity of the unit.
•
Fuses must be of fast type (FF) with a maximum rating of
6A.
•
Disconnect all power before working on equipment.
•
When the unit is connected to the network do not touch
terminals.
•
Short circuit terminals of unused current transformers.
•
Any electrical parameter applied to the device must be in
the range specified in the user manual.
•
Do not try to clean the device with solvent or the like.
Only clean with a dry cloth.
•
Verify correct terminal connections before applying
power.
•
Only for front panel mounting.
