J38D01 - 19 -
8.10 CONFIGURING AN ITEM’S LOW OR HIGH LIMIT
Select “
REFERENCE CNFG
” on
“
CONFIGURATION MENU
”. Select low limit
(minimum acceptable value) or high limit
(maximum acceptable value) of the item to
configure then press
.
Then select the item to configure on the list and
press
again.
After selection of the item, the limit value should be
entered. Especially for power or user counters,
large values may be needed. Thus the user must
select the multiplier first (‘x1’,’x100’ or ‘x1000’).
For example; ‘x10’ means “
multiply set value by
10
”. Then the user will enter a smaller value.
The format of the value is “000000.0” and can be
between 0.0 and 999999.9
