J38D01 - 20 -
After entering the limit value of the item, the action
to be taken when the condition occurs has to be
selected.
LOCK
means that, once the condition occurs, it
will persist until manually reset by the user.
Otherwise the condition will reset automatically
when the event causing the condition goes off.
The user can select between actions to be taken
when the condition occurs.
”
VISUAL WARNING
” means there is no output
function, but a message is displayed on the
screen.
The unit has 2 internal relays and each one has
four input registers referred as “
VALUE-1
”,
“
VALUE-2
”, “
VALUE-3
”, and “
VALUE-4
”.
The condition may be directed to any relay’s
VALUE registers.
VALUE registers will be used in relay
configuration.
The “
RELAY CONFIGURATION
” chapter will
describe in detail the use of VALUE registers.
