DKG-209 User Manual V-29
(20.08.2013)
- 10 -
Group
Screen Contents
Description
GENSET
PARAMETERS
1
Genset Volts L1, Genset Volts L1-L2,
Genset Volts L2 , Genset Volts L2-L3,
Genset Volts L3, Genset Volts L3-L1,
Presented as a table.
2
Genset Current L1, Genset Frequency
Genset Current L2,
Genset Current L3,
Presented as a table.
3
Genset kW phase L1, Genset pf phase L1
Genset kW phase L2, Genset pf phase L2
Genset kW phase L3, Genset pf phase L3
Presented as a table.
4
Genset kVA phase L1, Genset kVAr phase L1
Genset kVA phase L2, Genset kVAr phase L2
Genset kVA phase L3, Genset kVAr phase L3
Presented as a table.
5
Genset average Current Genset total kW
Genset average Voltage Genset total pf
Genset Frequency Genset total kVA
Presented as a table.
6
Genset L1 current
Genset Phase L1 Current, large characters
7
Genset L2 current
Genset Phase L2 Current, large characters
8
Genset L3 current
Genset Phase L3 Current, large characters
9
Genset frequency
with large size characters
10
Genset active power
with large size characters
11
Genset average voltage
with large size characters
12
Genset kWh
8 digit counter
13
Genset kVArh
8 digit counter
Group
Screen Contents
Description
ENGINE
PARAMETERS
1
Oil Pressure
Displayed in bars and kPa, large font. If PSI
display is enabled by program parameter,
then displayed in bars and psi.
2
Engine Temperature
Displayed in degrees C and degrees F,
large characters
3
Fuel Level
Displayed in % of full tank capacity.
If Fuel Consumption per Hour parameter
is not zero, then also displayed in engine
hours. If Fuel Tank Capacity parameter is
not zero, then also displaed in liters.
4
Engine Speed
Displayed in RPMs
5
Battery Voltage,
Minimum battery voltage
Displayed in Volts DC. The Minimum
Battery Voltage is reset before each engine
crank cycle. Thus the displayed value
reflects the most recent status.
6
Engine Hours,
Total Starts
The engine hours is displayed up to
999’999.9 hours.
Total start count is displayed up to 9999
Group
Screen Contents
Description
MAINS
PARAMETERS
1
Mains Volts L1, Mains Volts L1-L2,
Mains Volts L2, Mains Volts L2-L3,
Mains Volts L3, Mains Volts L3-L1,
Presented as a table.
2
Mains Current L1, Mains Frequency
Mains Current L2,
Mains Current L3,
Presented as a table.
3
Mains kW phase L1, Mains pf phase L1
Mains kW phase L2, Mains pf phase L2
Mains kW phase L3, Mains pf phase L3
Presented as a table.
4
Mains kVA phase L1, Mains kVAr phase L1
Mains kVA phase L2, Mains kVAr phase L2
Mains kVA phase L3, Mains kVAr phase L3
Presented as a table.
5
Mains average Current Mains total kW
Mains average Voltage Mains total pf
Mains Frequency
Presented as a table.
6
Mains L1 current
Mains Phase L1 Current, large characters
7
Mains L2 current
Mains Phase L2 Current, large characters
8
Mains L3 current
Mains Phase L3 Current, large characters
9
Mains frequency
Mains Phase L1 Current, large characters
10
Mains active power
with large size characters
11
Mains average voltage
with large size characters
