- 95 -
COMMAND
DESCRIPTION
RESPONSE
GET IP
If GPRS connection is active,
the IP address of the
connection is sent.
GPRS 1
GPRS connection enabled.
GPRS 0
GPRS connection disabled.
RESET
ALARMS
Dismisses the alarms on the
device. Operation mode is not
changed.
REBOOT
The unit switches off and on
again
No response
RESET MODEM
The modem of the unit
switches off and on again
No response
FORCE STOP
The unit enters STOP mode.
FORCE RUN
The unit enters RUN mode.
OUT1 ON
Set remote controlled output
#1 to active state.
OUT1 OFF
Set remote controlled output
#1 to passive state.
OUTxx ON
Set remote controlled output
#xx to active state. (xx denotes
any number between 1 and
16)
OUTxx OFF
Set remote controlled output
#xx to passive state. (xx
denotes any number between
1 and 16)
User Output xx =
OFF
User Output xx = ON
User Output 1 = OFF
Unit forced to RUN!
User Output 1 = ON
Unit forced to STOP!
SMS messages are only accepted from phone numbers set in
SMS1-2-3-4
PHONE NUMBERS
parameters.
Responses to SMS messages are sent to all recorded numbers.
SMS messages must be sent exactly as below, without spaces.
Only
CAPITAL LETTERS
must be used.
Alarms cleared!
GPRS disabled!
GPRS enabled!
IP: 188.41.10.244
19. SMS COMMANDS
