D-500L Firmware V-5.8
K35D03-EN - 104 -
Parameter Definition
Factory Set
Description
Rainbow Address-1
Rainbow Address-2
wss1.datakom.com.tr
These parameters accept both internet addresses (like
http://datakom.com.tr) and IPv4 addresses (like
78.192.238.116). Information for remote monitoring is
sent to these addresses.
The port information of these addresses are found in
Controller Configuration group.
Mail Account Name
d500_a
This is the account name appearing in the
“
from
” tab
of the e-mail recipient. (ex: [email protected])
Mail Account
Password
d500_1234
This is the e-mail password of above e-mail account.
Mail Server Address
smtp.mail.yahoo.com
This is the Outgoing Mail Server Address of the above
e-mail account (ex: smtp.gmail.com)
E-mail Address-1
E-mail Address-2
E-mail Address-3
-
-
-
These are e-mail recipient addresses where the unit is
intended to send e-mail messages. Up to 3 e-mails can
be sent at once.
Parameter Definition
Unit
Min
Max
Factory
Set
Description
Rainbow Refresh Rate
sec
0
65535
5
The unit will update the distant
monitoring terminal with this rate.
Rainbow Address-1 Port
-
0
65535
0
This is the port number of the first
monitoring terminal address.
Rainbow Address-2 Port
-
0
65535
0
This is the port number of the second
monitoring terminal address.
SMTP Port
-
0
65535
587
This is the port number used for e-mail
sending.
E-mail on IP Change
-
0
1
0
This parameter controls e-mail sending
when IP address of GPRS connection is
changed. No warnings generated.
0:
no e-mail on IP change
1:
e-mail sent on IP change
Below ETHERNET related parameters are found in the
Controller Configuration group.
16.14. ETHERNET PARAMETERS