Manual Datafox Evo 4.6 FleKey
Page 169
Date: 14.09.2021 V 04.03.17.XX
5.16.2.1. Description of the field function
The measured temperature is stored in the record description field "Temperature" after successful
completion of the function in this example.
The following settings are made in the "Temperature measured value of fever control" area:
The measured temperature can be written to a "Global Variable".
The unit of measurement can be selected between Celsius and Fahrenheit, and the measured
value is then displayed accordingly. The unit is also written into the record description field and
possibly into the "Global Variable".
The valid measuring range can be adjusted within its limits if necessary. Below 30°C and above
42°C it is to be assumed that no valid body temperature was measured. Elevated temperature
and thus suspected fever is indicated from 38.0°C. Which status value is assigned to the result
depends on these limits and has already been explained above.
After a valid or only after an invalid measurement, a query can be activated to be able to repeat
the measurement. This gives the user the possibility to perform measurements again by one or
more repetitions, e.g. if there were still clothes in the measuring range.
With the new field function, it is
possible to carry out a temperature
measurement.
At the same time, a limit value can
be set, which is then used for eval-
uation.
The measured temperature can be
displayed in a
GV
and saved in a
Data set
Setting range for the result evalua-
tion.
If the result of the evaluation is to be saved in a
data record, you can select the corresponding
data field here.
If the result of the evaluation is to be saved in a
GV, you can select it here.
