Manual Datafox Evo 4.6 FleKey
Page 107
Date: 14.09.2021 V 04.03.17.XX
PHG modules and firmware:
All configurations like tables etc. are to be configured in the same way as for the access readers of
the TS series.
Only exception:
The IO box is not specified in the reader table. Thus, information regarding the modules which are
connected via the I
2
C bus, is omitted.
Corresponding reader table:
ID
ZM
TM
RefLocation
RefAction
PinGeneral
Description
1
320
1
0
1
0
Master device
2
010
1
1
1
0
Reader at RS485
(PHG)
3
011
1
1
1
0
IO-Box at I
2
C-Bus
4
020
1
2
2
0
Reader at RS485
(LTM)
5
021
1
2
2
0
IO-Box at I
2
C-Bus
If you want to use the PHG
modules, you have to set it in
the Additional Options.
After changing over to the ac-
cess readers of the PHG series,
the firmware must be trans-
ferred again.
The device then selects the re-
spective firmware from the
DFZ-file.