Manual Datafox EVO 3.5 Universal
Seite 21
Datum: 26.11.2018 04.03.11.XX
Some settings to write the transponders must be adjusted in the setup.
Note:
If IDs are to be written with a password,
the password must first be programmed on them.
!
Attantion:
In the setup a programmable transponder type and a programmable segment must be
set. Ex.:
- Hitag 2 -> from segment 4
- Mifare Classic -> from sector 0 block 1
Otherwise, only the type and version of the transponder reader will be displayed.
name
meaning
transponder type
Here, the correct transponder
type must be specified
segment no.
In which segment should be
written / read
starting ammount
Defines the starting value of the
number to be programmed
autoincrement
When activated, the program-
ming value always counts up
the final number
password
The password to write / read
the ID