Manual Datafox EVO 3.5 Universal
Seite 38
Datum: 26.11.2018 04.03.11.XX
Timing of the Digital Outputs for the MasterIV Device Series:
It is possible to time the digital outputs of the MasterIV device series via tables. Thus, for example
turning down the heating system at night, a buzzer control and much more can be realized.
The following tables must be configured:
► Action
► Reader
► Time
Description:
Each action that is to be activated must be entered in the table Action. The table Action refers to the
tables Reader and Time. In the table Reader the module is provided on which the relay or the Open
Collector is to be switched. The reference to the table Time indicates when the switch is to be done.
If start and stop time are entered, the relay is switched on when exceeding the start time and
switched off when exceeding the stop time. The entry of the duration Elapse in the table Action is
ignored. If the relay is only to be activated for a few seconds, e.g. for a buzzer control, the stop time
has to be set on "‘00 : 00"’. If the start time is exceeded, the respective output will be switched for X
seconds (RefTime in Action table). The entry Elapse in the table Action now indicates the on-time.
Example:
► A buzzer is to be activated for
3
seconds from Monday to Friday at
10.00
am and 4 pm
(
16.00
). The buzzer is controlled by the internal relay of the PZE-MasterIV.
► The heating system is to be set to the "‘day mode"’ at
07.00
am and to the "night mode" at 7
pm (
19.00
) on all weekdays. The corresponding relay is at the door module with the bus
number
2
.
Reader.txt
ID
ZM
TM
RefLocation
RefAction
PinGeneral
1
1
320
0
0
0
2
1
02
0
0
0
0
Time.txt
ID
Weekdays
TimeEnd
TimeEnd
3
12345
10:00
00:00
4
12345
16:00
00:00
5
1234567
07:00
19:00
Action.txt
ID
RefReader
PortOut
Elapse
RefTime
6
1
1
15
3
7
1
1
15
4
8
2
1
0
5
